Tiller to Remote Conversion

[botno-bork]

I am looking at a used 2004 9.9 mercury, long shaft, tiller with manual start -- to be used as a kicker. But I want to convert the tiller to remote operation, including steering. I know that mercury offers a remote control kit (881170a4) for manual start motors but what additional parts will I need? I want to tie the steering with my main motor which is also a Mercury (115)

[boats.net]

If this a two stroke 9.9hp then you would need
42805A 6 REMOTE CONTROL ATTACHING KIT to convert motor to remote control operation.
You can install a Auxiliary motor steering kit between the 115 and the 9.9 for steering 9.9, have a choice of
892763A13 Zinc steering kit or
892763A16 Stainless steel steering kit

[botno-bork]

I have a 2004 4 stroke 9.9 not a 2 stroke.

[boats.net]

The 4 stroke uses 856553A 2 remote control attachment kit

[botno-bork]

The 4 stroke uses 856553A 2 remote control attachment kit

When I checked this website for parts, kit that was listed was 895284A02 not 856533A2. Will either work for tiller to remote conversion?

[boats.net]

Here is link to 2004 9.9 four stroke Mercury Marine OutboardParts 2004 1F10213CD ACCESSORIES Diagram

Might list your serial number so we can verify which model you have.

[botno-bork]

OK -- Here's the problem. The serial number is OR147966 and the motor is a 2006 8hp. I received the wrong information from the seller. I believe that's why the remote conversion kit numbers are different. Given this new (and correct information) what do I need to convert tiller to remote? I apologize for the misinformation.

[boats.net]

895284A02 CONVERSION KIT, Remote Control, Manual Tiller to Manual Remote SN# USA-0192771 and below
17024A03 ATTACHING KIT, Steering Link Rod

[martin1]

there is little bit problem about 895284A02 CONVERSION KIT may i use Manual Tiller or it will create problem.