Buy Mercury Parts
Buy Mercury Marine Outboard Parts

Announcement

Collapse
No announcement yet.

serial number help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • serial number help

    I have a 150 black max out board and I know like to know where the serial number is at on the motor ? I have looked all over it and I found some numbers on the driver side by the head at the bottom the numbers are 8588346 then 0-3 and square with a 2 in it ? Is this the write number ? I want to know what year and if it's really a 150 the guy I got from said it was a 175 with a 150 hood on it ? Any help will be appreciated sorry for a long post thanks everyone

  • #2
    No that number just comes up as invalid number.
    Regards
    Boats.net
    Mercury Outboard Parts
    MerCruiser Parts
    Force Outboard Parts
    Mariner Outboard Parts

    Comment


    • #3
      Where would the serial number be at on the motor ?
      I found some new numbers hope this is right 0 1433-3708-01
      Last edited by xllxmrjohnxllx; 12-16-2009, 04:11 PM.

      Comment


      • #4
        Some of the older models had the serial number on a welch plug in block but the newer ones don't have it on engine block no where.
        Regards
        Boats.net
        Mercury Outboard Parts
        MerCruiser Parts
        Force Outboard Parts
        Mariner Outboard Parts

        Comment


        • #5
          I found some more numbers maybe this is right 0 1433-3708-01????

          Comment


          • #6
            Look at the posted picture and this will tell you the date produced. Also on the crankcase have right above the throttle arm bolt you should see a number stamped into flange ,this will be the horsepower but not all blocks stamped. Also there should be a welch plug on top of block with serial number. Also the model/series number of carb can tell horsepower...
            2= 200
            7= 175
            5= 150
            3= 135
            Attached Files

            Comment


            • #7
              It has 3 2 barrel carbs on it thanks everyone for the tips and help I really appreciate it ! Maybe 1 day i'll know enough to help others lol

              Comment


              • #8
                Post the date code (example: 09-27-89) and can get you the series carb #'s it should have.

                Comment


                • #9
                  Where do I find the date on the motor ? I found some numbers by where the power tilt and trim hook to the motor and the numbers are O or 0 then 1433-3708-01 i'm not sure about if they are the right ones

                  Comment


                  • #10
                    Look at the earlier post with the powerhead picture, circled in red is the area of date code and serial # area.

                    Comment

                    Working...
                    X