Buy Mercury Parts
Buy Mercury Marine Outboard Parts

Announcement

Collapse
No announcement yet.

Alarm on 1996 Mercury 115 HP ELPTO

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Alarm on 1996 Mercury 115 HP ELPTO

    Hello all! The outboard above started having an alarm Saturday night. It was 60 degrees out and humid. Water was 64 degrees. I know the alarm wasn't constant. From what I remember it would go off steady for 20 seconds then stop then go same again.

    Water was pissing out fine and the alarm started as soon as I started the engine so wasn't overheat.

    Oil resivoir is 3/4 full.

    The Speedometer and tachometer both have the backlights but neither work.

    Motor seems to run fine and I was able to go full speed no problem...

    Any help would greatly be appreciated!

  • #2
    Ok so I went out and checked it.... It alarms steady shortly after the "One Buzz" check alarm without even turning the key to "Start".

    If I push in the key and wiggle it the alarm shuts off.

    My guess is I need a new Ignition Switch?

    Did I figure it out?

    Also the control is a QuickSilver with Power Trim and push the key in for choke... Where can I find the Ignition Switch?

    Comment


    • #3
      Guess there's not anyone using this forum?

      Comment

      Working...
      X