I have a 1990 Mercury 175hp magnum II RX4 I just bought the motor and the previous owne had let it sit a while. I have gone through and replaced all the fuel lines, soaked the carbs. And made sure everything is how the manual says it should be. My problem is that I am not getting any fuel to the fuel bulb. I replaced the bulb with no change, I put $30.00 worth of fresh fuel in the tank. It is on a 22 ft. Deck boat and the gas tank is built into the boat and I can't really see the gas tank to know what to check and what to check for a blockage in the line. Can anyone tell me what I need to check? Or how to determine why the bulb won't pump up? Or how to go about checking things to rule out different items?
Announcement
Collapse
No announcement yet.
No Fuel pressure
Collapse
X
-
Remove engine side fuel hose from primer bulb, squeeze bulb and put finger over open hose end and release pressure on bulb, repaet a couple of times to see if will pul gas up.Regards
Boats.net
Mercury Outboard Parts
MerCruiser Parts
Force Outboard Parts
Mariner Outboard Parts
Comment