i have a 2002 15hp 2-stroke merc that does not look like it is getting fuel to the upper cylinder. i have taken the carb off and cleaned twice, check the reeds they looked good, i replaced the fuel
pump,checked the coils and swaped out the cdi box.put in new plugs.it starts hard you have to choke it most of the time. when i get it running i let it run for 10 min. and pull the plugs the bottom plug looks like it has been fireing
but the top plug looks like i just took it out of the box, and its not wet. while running if i pull the plug wire on the top there is no change but if i pull the bottom plug wire it quits. anyone have any ideas what to do.
thanks
pump,checked the coils and swaped out the cdi box.put in new plugs.it starts hard you have to choke it most of the time. when i get it running i let it run for 10 min. and pull the plugs the bottom plug looks like it has been fireing
but the top plug looks like i just took it out of the box, and its not wet. while running if i pull the plug wire on the top there is no change but if i pull the bottom plug wire it quits. anyone have any ideas what to do.
thanks
Comment