No spark out of switch box on 1982 50 hp

[jepnut]

I have a 1982 50 hp Mercury that has no output to coils from switch box.The readings from the Stator are Blue/white to Blue 2250 ohms and 167v while cranking.Red to Red/white 50 ohms and 26v.The Trigger readings are Purple to White 990 ohms and 1.8v.Brown to white/black 990 ohms and 1.8v.All four Trigger wires read 1.5v to ground.I have the Rectifier and Kill wires disconnected for test.All test done with Fluke 87 meter.My question is do i have enough from Stator and Trigger to fire Switch box or would you think the box is bad?Thanks Jepnut.

[edmund4x4]

re; no sparky

Yes those readings are pretty close to spec. That dva voltage on stator should be 180v min. I believe. Outboardparts.com has a link with elec. ts specs for merc,omc,etc. Switch boxes go bad all the time--thats your best route. Edmund.